#BATTERY EEPROM WORKS ADAPTER NOT FOUND SERIAL#

A 'Stamp Not Found' message is almost always (95%+) due to one of two things:ДЎ) The Stamp is not getting power or adequate power.ДЄ) This could be caused by weak or dead batteriesД«) This could be caused by a defective AC adapter (wall-wart)Д¬) It has occasionally been caused by faulty power wiringД) If other circuitry is connected to the Stamp, there might be a short-circuit in that circuitryДў) The serial connection between the Stamp and the PC is not working properlyД«) If you're using a USB to serial adapter, it might be one that doesn't properly implement the handshaking lines (DTR particularly)Д¬) You might be using the default USB driver for serial adapters which doesn't work for programming. This has been said many times before and is in the FAQs for the Stamps (I think). I will post how it was solved and if you wish you could make this a sticky so no one will have to be stuck searching the forum finding threads that are about the same problem, but doesn't say how the person resolved the problem. I have read several other posts similar to mine, but the people who have their issue solved never explain how they solved it. I looked at the MEMBER SUPPORT FAQ and there was no answer to this problem there. I am using a reliable USB port was recognizing the bot until late last night when I made some adjustments to the servos. I am using the USB cable that came with the boe-bot. two batteries are at 1.49 and the other two are at 1.5. My Operating System is Vista, My 1.5 volt batteries all have plenty of juice according to my multimeter. I searched the forum for an answer, but to no avail. If anyone else has faced this issue, please let me know. I can guarantee that my basic stamp is on board. I try to run a new program and I get the warning basic stamp not found. I connected it to my computer and identifed the virtual usb port (com 6) to see that the loop was yes and echo was yes.

My robot was working great until last night when it started acting a bit- abnormal. I have a basic stamp 2 rev j and my microprocessor is rev d.

I am running the regular power supply that comes with the boe-bot kit. I am trying to decipher my robots health issue today.

Battery eeprom works adapter not found